catalogue
contacts

company

sales

about us
 bearings
 comlin
 constant effort supports
 foam
 isocast
 loadcell
 pipe clips & ancillaries
 products
 restraints
 services
 software
 variable effort supports


when used on wide beams the depth (h) of the standard cage may be increased if necessary so that the inclination of the sides does not exceed 25&de g; from the vertical. as a guide, the maximum beam widths for which the standard sling rod cage depths are suitable, are as follows: sling rod 8 10 12 16 20 24 30 36 42 diameter maximum 191 191 191 210 229 254 292 330 330 beam width a = 50mm for flange width 133mm or greater a = 38mm for flange width less than 133mm


order by:
fig number, bolt diameter.
material:
bsen10 025 grade fe 430a or equivalent.

bolt bolthole 1 swl size d d i a kgf kn a 35 x a 25x8x26 ax30x5 35 1o 20 165 20 50 12 8 9 108 230 2.3 10 35x8 2 5 x 8 x 2 6 ax40x6 35 1 5 -2 5 170 20 50 16 10 1 1 110 360 3.5- - & 12 45x8 35x8x31 ax50x8 45 20 30 170 25 55 18 12 14 106 530 5.2 35x10x40 ax65x8 45 30 35 180 30 70 22 16 18 106 1010 9.9 50x10x45 ax75x8 60 35 40 200 30 90 30 20 22 90 1580 15.5 axloox12 80 45 55 210 40 95 33 24 26 94 2280 22.4 axloox12 90 45 55 240 50 115 43 30 33 109 3650 35.8 ax125x12 100 60 65 275 65 140 48 36 39 124 5340 52.4 120x25x90 ax150x15 130 75 75 305 75 165 56 42 45 134 7400 72.6
301l two bolt pipe clip
(-20ºc to 100ºc)
pin
dia.
d
dia
a b wxlxt safe working load
kgf kn

[contact us] [company] [sales] [about us]
please contact our webmaster with questions or comments.
copyright 1998 pipe supports limited. all rights reserved.